POE oil POE 100

Name: POE oil POE 100
Brand: Würth
SKU: 0892764045

OIL-POE-100-(EL-COMPRESSOR)-210ML

Art.-no. 0892764045

EAN 4050642545014

All versions

Individual price display after login

POE oil POE 100

Art.-no. 0892764045

Individual price display after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +94 112 894930

Special POE (polyester) air-conditioning compressor oil for vehicle air-conditioning systems using R134a/R1234yf refrigerants and electric air-conditioning compressors (hybrid, start/stop, electric)

Excellent resistance to potential electric leakage current in high-voltage air-conditioning systems

Very hydrophobic

Not conductive

Electrical components are not affected

Excellent smoothness, thereby protecting the compressor from wear

Notice

Do not mix with other air-conditioner compressor oils
Store such that the oil is protected from moisture
Use up the open can quickly and do not store for long periods.

The usage instructions are recommendations based on the tests we have conducted and our experience. Carry out your own tests before each application. Due to the large number of applications as well as storage and usage conditions, we do not assume any liability for a specific application result. Any technical information or advice provided by our free customer service shall be provided to the exclusion of any liability, unless the advice or information is part of our contractually agreed scope of services or the advisor was acting intentionally. We ensure the consistent quality of our products. We reserve the right to make technical changes and further developments to our products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For maintaining, lubricating and cooling vehicle electric air-conditioning compressors as well as sliding and rotating parts in the R134a and R1234yf air-conditioning circuit.

Instructions

Top up low compressor oil according to the amount used or to the amount recommended by the vehicle manufacturer and add to the air-conditioning circuit via the air-conditioning service unit or using an injector.

Contents	210 ml
Density	0.964 g/cm³
Kinematic oil basis viscosity	11 mm²/s
Conditions for viscosity of oil basis	at 100°C
Melting point	-30 °C
Min. flashing point	274 °C
Water-soluble	No
Viscosity/consistency	Liquid
Vapour pressure	110 kPa
Conditions for vapour pressure	at 20°C
Shelf life from production	60 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove

Description:

Permeation level: 6

With cotton velour finish inside.

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.