Welcome to Würth Sri Lanka For trade customers only

Retouching putty Metal epoxy stick

Retouching putty epoxi-stick metal high temperatur
RETCHPUTY-(EPOXI STICK)-ME-120G

Art.-no. 0893449011

Prices for customers after login

Retouching putty Metal epoxy stick

Art.-no. 0893449011

Prices for customers after login

Quantity

PU

Exclusively for trade customers

Register now and access more than 2,000 products

2-component compound for quick and simple repairs of surface damage.

Easy to use


  • Time-consuming mixing no longer required

  • Good dispensing facility

  • Quick to apply


Excellent adhesion properties


  • High-strength

  • Numerous application options


Simple to process further


  • Suitable for a wide range of post-processing options, such as drilling, milling, sawing and sanding

  • Can be painted over


High degree of temperature resistance


Temperature resistance up to 120°C, briefly up to 150°C

Notice

Protect from frost and direct sunlight when not applied. Gloves should be worn when applying the repair compound. Due to the different material densities, there are differences in the information regarding the weight of each stick type. For applications subject to high material stresses, the suitability of the repair compound must be checked with preliminary testing.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue(X)

Datasheets(X)

Application area

For filling surface damage to metal, e.g. gear unit housing, aluminium and die-cast parts etc.


Application substrates: Steel (plain and anodised), zinc sheets, cast iron, aluminium, copper, brass, chrome, titanium, lead and stainless steel

Instructions

1. The surface must be clean, free from grease and load-bearing. Roughening the surface beforehand improves adhesiveness


2. Twist off or cut off the required quantity and knead with your fingers until an even colour is achieved


3. Then apply the repair compound within the next 2–3 minutes


4. Dampen your hands with water to improve the modelling process


5. After another approx. 20 minutes, the compound is completely hardened and can be processed further

Chemical basis

Epoxy resin

Colour

Silver coloured

Density

1.85 g/cm³

Length

175 mm

Diameter (Ø)

22 mm

Can be further processed after min.

20 min

Processing time

3 min

Min. final strength

3 h

Conditions for final strength

at 23°C

Min. processing temperature

5 °C

Max. processing temperature

25 °C

Min. temperature conditions

-20 °C

Max. temperature conditions

120 °C

Max. short-term temperature resistance

150 °C

Min. temperature resistance of the hardened material

-20 °C

Max. temperature resistance of the hardened material

120 °C

Substrates with good adhesion

Copper
Brass
Aluminium
Lead
Chrome
Stainless steel
Cast iron
Steel (bare and anodised)
Titanium
Zinc sheets

Shore D hardness

87

Min. tensile strength

6.4 N/mm²

Shelf life from production

24 Month

Conditions to maintain shelf life from production

frost-free storage area, no exposure to sunlight

Suitable glove:

 
Product
Description
Nitrile chemical protective glove
Nitrile chemical protective glove
Description:
Permeation level: 1
Cotton velour lining
Nitrile chemical protective glove, heavy-duty
Nitrile chemical protective glove, heavy-duty
Description:
Permeation level: 1
Long, heavy-duty design
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.